Partitions inside the house are usually not supporting walls. Therefore, gas stoves are used for laying partition walls inside the house, which are made on the principle of cellular concrete. Each plate made of cellular concrete is easy to process with hand tools. You can score nails into the stove, screw the screws and screws. By the way, by clicking on the following link you can buy polyurethane beams at favorable prices.
To install the partition inside the house at the installation site of the wall, the rail of the rail is installed, according to which the wall partition will be installed. One guide rail is strengthened to the floor, and the other to the adjacent wall, to which the wall partition will be attached. Directs-bruks are glued with adhesive solution. A strip of polystyrene foam to the width of the plate is glued to the floor along the wooden rail. An adhesive solution is applied to a strip of polystyrene foam and the first partition plate is installed. To strengthen the plate of the partition on the adjacent wall, the plate is attached to the wall with an aluminum pin, which is clogged into the end of each plate walking along the adjacent wall.
To strengthen the plates of the partitions, special fastening strips are clogged between the seam. The second row of plates begins to be laid from half the stove, which is installed from the adjacent wall to shift a number of plates for half a plate for ligation of the entire partition.